top of page
Laser Cutting & Engraving | Laser Cutter | X252
201606newlogo.jpg

Laser Cutter

X252

The LaserPro X series offers an economical alternative for laser cutting and engraving. The LaserPro X series is equipped with dependable sealed CO2 laser which offers a reliable source of 80W and 100W of power for mass production requirements.

Spec
​Humanized design, easy to use
Programmable_Origin_L.png

Programmable Origin

Drag and engraver function that is easy to move the machine to the cut or engrave object instead of via control panel. Designed for simplifying complex tasks.

Easy-to-use_Control Panel_L.png

Easy-to-use Control Panel

A control panel with coherent hot-key design and graphic icon displays that allows you to directly change the laser parameter setting, set jobs to repeat unlimited times, queue job, delete jobs, and more.

AutoFocus_Patented_L.png

AutoFocus (Patented)

Patented Autofocus Gauge adjusts the laser engraver to the precise focal point on the engraving area automatically. The Autofocus is the most effective lens-focusing tool that prevents human error when exact measurement of distance from the surface of the working material is needed.

Outstanding Design to Best Meet your Needs
Closed-loop_DC_Servo_Technology_S.png

Motion System with

DC Servo Motor

The LaserPro X252 utilizes a high speed closed-loop DC servo motor for precise and fast carriage movement to ensure exceptionally accurate cutting outputs.

1609232307348424872.png

Rotary Attachment(Optional)

By using the rotary attachment, laser engraving on cylindrical or round objects is now possible. This option uses the fourth axis to rotate your object 360° to allow engraving on cups, wine glasses or even a baseball with two types of conical fixtures available. The minimum/maximum diameter and length of the working object are 90/180mm and 450mm respectively. Its maximum weight should not exceed 4kgs.

1608022255153620831.jpg

Honeycomb Table

A clean and better cutting quality is achieved by the honeycomb table when cutting materials into small pieces. It lifts the workpiece off the work table from hitting by laser reflection. The dust and vapor created during processing are then taken away effectively through the honeycomb cell by a down vacuum funnel exhaust. .

Pass-through_L.png

Pass-through Front to Rear Doors (Optional)

A design with doors on both ends to accommodate extremely long working pieces, front door without the need for a screwdriver.

1609235436128802831.png

SmartAIR™ Fine Nozzle (Optional)

The optional SmartAIR Fine Nozzle is recommended for laser engraving or cutting thin materials such as textile. The smaller caliber nozzle is positioned closer to the object for a concentrated blast directed over a small area to eliminate burning on the cutting edge. The perfectly-vertical design of the SmartAIR Fine Nozzle produces a concentrated airflow to blow away dust and unwanted residue, leaving a clean product surface.

1624507923489634021.jpg

Air Compressor

A specially designed Air Compressor, by using an oil-less diaphragm, helps you eliminate the harmful and damaging side effects of moisture on the laser optics. In addition, it provides the optimal air pressure when laser engraving and cutting to blow away vaporized particles and prevent overheating, keeping lenses and mirrors clean for longer laser life.

Safety Design
Emergency_Stop_L.png

Key Switch & Emergency Stop

Big red button located on the top of the machine allows operators to stop the laser and the motion carriage immediately to provide a safe operational environment.

1609232181784691788.png

SmartGUARD™ Fire Alarm (Patented)(Optional)

Laser engraving and cutting operation using the SmartGUARD Fire Alarm assures optimum safety. When there is a malfunction, the alarm system will be active and shut-down the operation system immediately.

RoHS_Compliance_L.png

RoHS Compliance

All GCC products are RoHS-compliant (the European Parliament Directive 2002/ 95/ EC, Restriction of Hazardous Substances) and lead-free (pb free). GCC will continue to concern and provide environmentally friendly products to protect the earth for our further generation.

window.jpg

Protective Window Cover

Protective window cover with protection wavelength OD7+@10,600nm

PureAir.jpg

Fume Extraction System(Optional)

Designed to remove hazardous fumes and dust during laser processing to protect the health of operators, eliminate environmental pollution and enhance laser engraving and cutting.

goggle.jpg

Laser Goggle(Optional)

Laser goggle with protection wavelength OD7+@10,600nm

Spec
bottom of page