獲取報價

Cutter

Sabre Series 2

The versatile cutter designed for safety and accuracyKeencut’s Sabre Series 2 is an out of the box ready to use solution for medium-volume cutting. It’s perfect for the print shop, workshop, studio, architects’ practice, or educational institutions. The Sabre combines Keencut safety with versatile general-purpose cutting; it does not need to be fixed to a dedicated bench, and there is no set-up.

The Sabre provides a straight square cut of materials from 13mm (1/2″) thick foamboard to delicate tissue paper. Floating, self-adjusting hinges automatically adapt for stable lay-flat cutting and offer the opportunity to cut wider sheet materials.

Space-saving and fully mobile, the Sabre can be mounted on an optional stand and fitted with a waste catcher and roll feed. The safety features make it ideally suited for use by inexperienced operators in any environment.

Space saving fully mobile general purpose cutting solution
Cuts materials up to 13mm (1/2″) thick and 3m (120″) wide
Guaranteed 1.0mm (0.04″) accuracy
No need for calibration
Stable cutting platform
Single tool head with three holders for different cutting blades
Automatic blade retraction
Cuts a range of materials, including cold cutting textiles
Scores for snapping acrylics
Stand, waste catcher and roll feed options

Versatile

The Sabre Series 2 will safely cut a wide range of materials, up to 13mm (1/2″) thick and 3m (120″) wide. It is a fully mobile cutting solution with no need for calibration when installed. Its strong base will compensate for a substandard work surface to provide a stable cutting platform and it will sit directly on a bench or can be mounted on an optional stand that has the capacity to be fitted with a waste catcher and roll feed to become the perfect production cutter.

Secure and accurate

The Sabre Series 2 has guaranteed 1.0mm (0.04″) accuracy. Full-length silicone grip strips in the base and underside of the cutter bar hold your cutting media firmly in place. The integral base plate has metric parallel indents and a cut groove to assure accuracy. Floating, self-adjusting hinges automatically adjust to give lay-flat cutting on materials up to 13mm (1/2″) thick and holds the slideway above the work-surface for easy repositioning of the media.

Safety by design

The Sabre Series 2 is designed to provide maximum operator safety for all users in a wide range of environments such as commercial offices, industrial workshops or craft studios. It provides a controlled and measured method of cutting for a wide range of materials, removing all the dangers of using a hand knife. The Sabre securely clamps the media, and the blade is always under control. The automatic blade retraction and safely contained blades also protect the user when placing material on the cutter.

Simple to use

The Sabre Series 2 is simple to operate, requiring little training. The ergonomically designed cutting head allows single-handed cutting action and uses downward pressure to engage the blade. The single tool head offers a choice of three blade holders which can be switched safely and quickly to suit different materials. Blade changing and depth adjustment are simple and completed without the use of additional tools.

Multiple heads

The Sabre Series 2 has three blades as standard:

Graphik blade holder: designed for the sign maker and digital printer with a specially crafted knife edge for extra stability in tougher materials and a cutting depth of up to 13mm (1/2″). By running the blade backwards, acrylics can be scored for snapping. The reversible blades have the ability to be set to cut left-right or right-left.

Rotary blade holder: cold cuts textiles and other delicate materials and is ideal for trimming thin strips off banners and posters where a knife blade would be too aggressive. It is fitted with a red safety blade guard to be engaged when not in use. A cutting mat is required to be used when using the rotary blade holder, please note this is not supplied.

Medium duty blade holder: uses standard off-the-shelf medium duty utility blades for general purpose, economical cutting and can be adjusted to cut materials up to a depth of 10mm (3/8″).

Materials cut

Semi-rigid materials

Corrugated cardboar ≤ 13mm (1/2″) 
PVC Foamboard ≤ 13mm (1/2″) 
Corrugated / fluted plastic e.g Correx ≤ 13mm (1/2″) 
Foam centred board ≤ 13mm (1/2″)

Rigid materials

Cast acrylic / Plexiglas ≤ 3mm (3/32″) (scoring only)

Flexible materials

Banner
Magnetic sheet
Film
Self-adhesive vinyl
Textiles and delicate materials

Dimensions

Accessories

Stand pack for Sabre S2

Stand pack for the Sabre series 2. Stand packs also include a waste catcher & roll feed

Heavy duty stand with locking castors, waste catcher and roll feed bar that can be positioned quickly and easily where required. Stand is 90cm (36″) high and comes in sizes to match the size of your cutter. Please see the dimensions tab for more information.

Waste catcher is fabricated from a single piece of hard wearing plastic coated canvas.
Roll-feed bar is a single length of stainless tube to avoid rolls of material rotating and unwinding.

Extended measuring arm

An optional extended squaring arm 91cm (36”), set at 90 degrees to the slideway to improve accuracy and versatility. Works best with additional support under material when cutting large boards and comes complete with measuring stop, to enable multiple boards to be cut at the same size. Supplied with both metric (cm) and imperial (inch) scales for customer preference. For use on the Sabre Series 2 only.

HSGM hot knife holder

When used in conjunction with a Sabre series 2, the holder provides HSGM hot knife users with a safe, quick and accurate means of cutting and sealing synthetic fabrics. The simple-to-attach hot knife holder includes features such as spring loaded mounting block for easy mounting to the cutter’s slideway and a spring loaded trigger to automatically activate the hot knife when depressed. The hot knife holder uses a bearing and slide system designed for silent operation, user adjustment and minimal maintenance.

Graphik Blade

The Graphik blade is a double ground cutting edge with special tip design, to increase durability and reduce tip breakage. Supplied in packs of 100 and suitable for cutting all types of materials especially tougher materials where extra stability is required.

Medium duty blades

A double ground edged, reversible blade suitable for cutting all types of materials and made in Sheffield, England. Comes in packs of 100.

Cutter

Sabre Series 2

Materials cut

Semi-rigid materials

Rigid materials

Flexible materials

Dimensions

Accessories

Laser Engraving and Cutting

3D Printing

Trim & Cut

Binding and Booklet Making

Creasing and Perforating

Lamination

Digital Printing

Folding & Counting

Photobook Solutions

Security

Drilling

After Sale Service

Contact Us

©2023 by Apis Technology Limited

Cutter

Sabre Series 2

Materials cut

Semi-rigid materials

Rigid materials

Flexible materials

​Dimensions

Accessories

​

Dimensions